Placing Your Floating Pond De-Icer: It’s Easier Than You Think

Last month we talked a lot about why you need pond de-icers for your water garden. The role they play in keeping your fish healthy throughout winter is second to none. Today we’re going to talk in a little more detail about how to place your fish’s favorite cold weather device.


Placing a Floating Pond De-Icer in Your Water Garden:

  1. Don’t jump the gun. You don’t need a pond heater until your pond has frozen over, or at least started forming ice on its surface. Once you notice this happening, it’s time to take action.
  2. Decide on a location. Your pond heater should be placed within easy reach of the edge of your pond. If there are any maintenance needs or functionality problems, you want to be able to access the heater immediately.
  3. Insert the pond heater into your pond. It’s that simple. Once the location is chosen, you simply set your pond heater into the water. If it runs on electricity, it will obviously need to be plugged in. And if it runs on gas or oil, you’ll need to make sure this fuel source stays full all season long. *There are also some solar pond heaters that don’t require wiring and are very energy efficient. However, you need to live in an area that gets enough sun to keep them functioning properly.
  4. Drill when necessary. Ideally, you want to insert the pond heater as soon as you notice ice beginning to form on the surface of the water. However, if your pond is already frozen over and the ice is more than two inches thick, you’ll need to carefully drill a hole where you want to place the heating device. Don’t just crack the ice, because this can cause shock waves that will harm your fish and other pond life.

Placing a floating pond heater in your water garden is easy, but it makes a huge difference to your fish and other pond life. Have any questions? Contact one of our pond supplies representatives today.